Mortar Rake Unit

Attach directly unto the M14-spindle of the angle grinder
Diameter: 6, 8, 10, 12, 14 mm
Work length: 26 mm, 35 mm, 47 mm (35 and 47 mm are available in diameters 8, 10 and 12 mm)
3 tungsten carbide cutters
8, 10 and 12 mm can also be supplied with 4 carbide-cutters (only applies to work length 26 mm)
10 and 12 mm can also be supplied with 6 carbide-cutters (only applies to work length 26 mm)
Units provide the opportunity for faster replacement

Mortar Rake
Mount in an M10 OSM-adapter which is attached directly unto the M14-spindle of the angle grinder
Diameter: 6, 8, 10, 12 mm
Work length: 26 mm
3 tungsten carbide cutters
8, 10 and 12 mm can also be supplied with 4 carbide-cutters
10 and 12 mm can also be supplied with 6 carbide-cutters

Adapter
M10/M14-thread
Reusable adapter in hardened steel for OSM mortar rakes

Long Mortar Rake Unit
Attach directly unto the M14-spindle of the angle grinder
Diameter: 8, 10 and 12 mm
Work length: 60 mm
3 tungsten carbide cutters
Used for mortar raking, where more depth than normal is required 

Extra Long Mortar Rake Unit
Attach directly unto the M14-spindle of the angle grinder
Diameter: 8, 10 and 12 mm
Work length: 115 mm - cutter length: 60 mm
3 tungsten carbide cutters
Used for mortar raking, where unusual depth is required or in conjunction with a long mortar rake to remove entire bricks

Sole Plate in stainless steel
Mount on the angle grinder and connect to a fitting vacuum to remove the dust that will inevitably develop during the raking process
Simultaneously with working as a dust extraction unit the Sole Plate ensures a coherent raking depth
The Sole Plate is delivered with 5 reduction rings to fit most popular angle grinders

Sole Plate in nylon
Mount on the angle grinder and connect to a fitting vacuum to remove the dust that will inevitably develop during the raking process
Simultaneously with working as a dust extraction unit the Sole Plate ensures a coherent raking depth
The Sole Plate is delivered with 5 reduction rings to fit most popular angle grinders
The nylon material is more gentle to the existing brick work
The Sole Plate is delivered with 5 reduction rings to fit most popular angle grinders

Sole Plate with guiding plate in nylon
Mount on the angle grinder and connect to a fitting vacuum to remove the dust that will inevitably develop during the raking process
Simultaneously to working as a dust extraction unit the Sole Plate ensures a coherent raking depth
The nylon material is more gentle to the existing brick work
The Sole Plate is delivered with 5 reduction rings to fit most popular angle grinders
Equipped with a guiding plate which makes it easier to follow the joint without damaging the existing brick work

Dust Extractor Shroud for Diamond Tuckpointing Blade
Mount the Dust Screen on the angle grinder and attach suitable vacuum
The replaceable acrylic plastic window ensures good visibility
The Dust Screen can be set to a cutting depth between 10 and 25 mm

Diamond Tuckpointing Blade
For removal of hard mortar- and concrete joints
Width: 6,4 mm, 8 mm, 10 mm, 12 mm
The Diamond Tuckpointing Blade is more difficult to control and is less precise than an ordinary mortar rake, but it is capable of working in much harder materials

Brick Remover
Attach directly unto the M14-spindle of the angle grinder
Work length: 120 mm
Coated with diamond grit
Used for the removal of entire bricks in existing brick work
It is important that the Brick Remover is always in contact with the wall surface before you apply rotation